Figure 5-102 EPTZ linkage for playback
Step 3 Turn on the EPTZ linkage function, and then congure parameters.
If a certain channel has turned on the EPTZ linkage function, the conguration will still
take eect after exiting playback. When replaying the recording of this channel again, the
EPTZ linkage eect is still displayed.
Figure 5-103 Setting the EPTZ linkage for playback
Table 5-30 Parameters description
Parameter
Description
Display Mode
Select the number of tracked channels. Full screen, 1+1, 1+3 and 1+5
modes are available, and full screen is selected by default.
Linkage Track
After Linkage Track is enabled, intelligent events will be tracked. It is
disabled by default.
User's Manual
225
To Next Page
Loading...
