Figure 5-121 Add database
Step 3 Select Passerby Database from the Type list, and then congure other parameters.
Table 5-31 Passerby database parameters
Parameter Description
Name Enter a name for the passerby database.
Number of Images
Congure the number of images that the database can
contain.
Storage Full
Select the storage strategy when space is full.
●
Stop: No more images can be added.
●
Overwrite: The newest images overwrite the oldest images.
Back up the old images as necessary.
Time
Set the period in which the system removes duplicate face
images from the database.
Step 4 Click OK.
5.9.6.3 Adding Images to Face Database
You can add face images to the existing databases one by one or in batches.
5.9.6.3.1 Adding Face Images One by One
You can add one face image to the database. It is for the scenario that the registered human face
picture amount is small.
Procedure
Step 1 Select Main Menu > AI > Database > Face Database Cong.
Step 2
Click of the database that you want to congure.
User's Manual
242
To Next Page
Loading...
