1. Select General Alarm in AI Mode.
2. Click Setting next to Target Face Database.
3. Select the face database that you want to arm, and then click OK.
4. Click to modify similarity.
5. Click to congure alarm linkages.
●
Stranger Alarm : The alarm is triggered when the similarity of detected faces does not
reach the dened value.
Figure 5-127 Stranger alarm (AI by recorder)
1. Select Stranger Alarm in AI Mode.
2. Click enable the function.
3. Congure the alarm linkage actions. For details on alarm linkage, see Table 5-50 .
Step 5 Click Apply.
5.9.6.4.2 Conguring AI by Camera
Prerequisites
Make sure the connected camera supports face recognition.
Procedure
Step 1 Select Main Menu > AI > Parameters > Face Recognition.
Step 2 Select the channel, enable the function, and select AI by Camera in the Type list.
User's Manual
247
To Next Page
Loading...
