User's Manual
344
After registration, you can log in to the DDNS website to view the information of all the connected
devices under the registered account.
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
DDNS
.
Figure 5-233 DDNS
Step 2 Enable DDNS and then configure the parameters.
After you enable DDNS function, the third-party server might collect your device
information.
Table 5-65 DDNS parameters
Parameter Description
Type Displays the type and address of DDNS service provider.
●
For
Dyndns DDNS
, the default address is members.dyndns.org.
●
For
NO-IP DDNS
, the default address is dynupdate.no-ip.com.
●
For
CN99 DDNS
, the default address is members.3322.org.
Server Address
Domain Name
Enter the domain name that you have registered on the website of DDNS
service provider.
Username Enter the username and password obtained from DDNS service provider.
You need to register the username, password and other information on
the website of DDNS service provider.
Password
Interval Enter the interval at which you want to update the DDNS.
Step 3 Click
Apply
.
Enter the domain name in the browser on your computer, and then press the Enter key. If
the web page of the Device is displayed, the configuration is successful. If not, the
configuration failed.
To Next Page
Loading...
Need help?
General
