Figure 5-279 802.1x
Step 2 Select the Ethernet card you want to certify.
Step 3 Select Enable and congure parameters.
Table 5-79 802.1x parameters
Parameter
Description
Authentication
●
PEAP: protected EAP protocol.
●
TLS: Transport Layer Security. Provide privacy and data integrity
between two communications application programs.
CA Certicate
Enable it and click Browse to import CA certicate from ash drive. For
details about importing and creating a certicate, see "5.14.4 CA
Certicate".
Username The username shall be authorized at server.
Password Password of the corresponding username.
Step 4 Click Apply.
User's Manual
401
To Next Page
Loading...
