User's Manual
401
Figure 5-293 Basic settings
Step 2 Set parameters.
Table 5-83 Basic parameters
Parameter Description
Device Name Enter the Device name.
Device No. Enter a number for the Device.
Language Select a language for the Device system.
Video Standard
Select
PAL
or
NTSC
as needed.
Sync Remote Device
Enable this function; the NVR can synchronize information with the
remote device such as Language, video standard and time zone.
Instant Playback
In the
Instant Play
box, enter the time length for playing back the
recorded video. The value ranges from 5 to 60.
On the live view control bar, click the instant playback button to play
back the recorded video within the configured time.
Logout Time
Enter the standby time for the Device. The Device automatically logs
out when it is not working in the configured period. You need to login
the Device again.
The value ranges from 0 to 60. 0 indicates there is not standby time for
the Device.
Click
Monitor Channel(s) when logout
. You can select the channels
that you want to continue monitoring when you logged out.
CAM Time Sync Syncs the Device time with IP camera.
Interval Enter the interval for time sync.
Logout Time
You can set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
To Next Page
Loading...
Need help?
General
