5555
3. Once satised with NIGHT MODE adjustments,
navigate to the “HOME” screen by selecting the
“Previous Menu” button three times then selecting
“HOME”.
NOTE:
“NOISE DOWN LEVEL” is initiated by user’s setting.
(“LEVEL” “1”, “2” or “3”. Default is “LEVEL” “2”. “LEVEL” “3” is
the most quiet.)
NIGHT MODE start time can be adjusted up to +4 hours per
hour from default setting. Also ended time can be adjusted
up to -4 hours per hour from default setting. Default time is
determined by heat pump inner clock and logic. Adjustment
of start/end may be needed for some region and time zone.
If during operation the capacity demand is high, then the
night mode function will be temporary off by capacity prior-
ity function to return the room temperature to the set point.
(Default is ON)
To Next Page
Loading...
