Daikin Floor Standing Type F-Series User Manual

SiBE06-708_A Outdoor Unit - RK(X)S25/35G2V1B
Removal Procedure 202
3
Heat up the brazed part
of the suction side and
disconnect.
Note:

Do not use a metal saw for
cutting pipes by all means
because the sawdust comes
into the circuit.

When withdrawing the pipes,
be careful not to pinch them
firmly with pliers. The pipes
may get deformed.

Provide a protective sheet or
a steel plate so that the
brazing flame cannot
influence peripheries.

Be careful so as not to burn
the compressor terminals,
the name plate, the heat
exchanger fin.
4
Lift the compressor up
and remove it.
Step
Procedure Points
(R12032)
Suction side
(R7254)

Daikin Floor Standing Type F-Series Specifications

General

Brand	Daikin
Model	Floor Standing Type F-Series
Category	Air Conditioner
Language	English