Operation Manual SiBE06-708_A
63 Operation Manual
2.2 AUTO · DRY · COOL · HEAT · FAN Operation
10
AUTO · DRY · COOL · HEAT · FAN Operation
To start operation
1.
•
:
:
:
:
:
2. Press “ON/OFF button”.
•
To stop operation
3. Press “ON/OFF button” again.
•
To change the temperature setting
4.
1
5
2, 3
4
The air conditioner operates with the operation
mode of your choice.
From the next time on, the air conditioner will
operate with the same operation mode.
Press “MODE selector button”
and select a operation mode.
Each pressing of the button advances
the mode setting in sequence.
AUTO
DRY
COOL
HEAT
FAN
Cooling only
model
Heat pump
model
The OPERATION lamp lights up.
Then OPERATION lamp goes off.
Press “TEMPERATURE adjustment button”.
DRY or FAN mode
The temperature setting is not variable.
AUTO or COOL or HEAT mode
Press “ ” to raise the temperature and press
“ ” to lower the temperature.
Set to the temperature you like.
To Next Page
Loading...
Need help?
General
