Daikin Floor Standing Type F-Series - Removal of PCB

SiBE06-708_A Indoor Unit
Removal Procedure 144
1.4 Removal of PCB
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
1. Remove the shield plate.
1
Unfasten the 8 hooks
of the shield plate and
remove it.
2. Remove the sensor PCB.
1
Unfasten the 2 hooks
of the sensor PCB.
2 Disconnect the
connector [S49] and
remove the sensor
PCB.
Hooks
Hooks
Hooks
Shield plate
(R6788)
Hooks
Sensor
PCB
(R6794)
[S49]
(R6789)