Si33-105 Specifications
Specifications R407C PLUS Series Heat Recovery System 11
Notes:
"
1 Indoor temp. : 27°C DB or 19°C WB / outdoor temp. : 35°C DB / Equivalent piping length : 7.5m, level
difference : 0m.
"
2 Indoor temp. : 20°C DB / outdoor temp. : 7°C DB or 6°C WB / equivalent piping length : 7.5m, level
difference : 0m.
Model
RSEYP30KJY1
Constituent Model (Main Unit + Sub Unit) REYP20KJY1+RXEP10KJY1
Power Supply 3 phase 50Hz 380-415V
"
1 Cooling Capacity kW 82.1
"
2 Heating Capacity kW 82.1
Casing Color Ivory white (5Y7.5/1)
Dimensions : (H×W×D) mm (1,460×2,580×690)+(1,440×1,280×690)
Heat Exchanger Cross fin coil
Compressor
Model JT236DCVTYE@2+JT300DATYE@2×2
Type Hermetically sealed scroll type
Piston Displacement m³/h (43.3+28.4+28.4)
Number of Revolutions rpm (5,510, 2,900, 2,900)
Motor Output × Number
of Units
kW 5.5+7.5+7.5
Starting Method Direct on line
Fan
Model P52H11S
Type Propellor fan
Motor Output × Number
of Units
kW (0.14+0.23)×2+(0.14+0.23)
Air Flow Rate m³/min 510
Drive Direct drive
Connecting
Pipes
Outdoor Unit
Liquid
pipe
φ
22.2 C1220T (Brazing connection)
Gas
pipe
φ
41.3 C1220T (Brazing connection)
Discharge
pipe
φ
34.9 C1220T (Brazing connection)
Main Unit ~ Sub Unit
Liquid
pipe
φ
12.7 C1220T (Flare-Brazing connection)
Gas
pipe
φ
28.6 C1220T (Brazing-Brazing connection)
Weight kg 640+105
Safety Devices
High pressure switch, fan motor safety thermostat, inverter
overload protector, overcurrent relay, fusible plugs
Defrost Method Deicer
Capacity Control % 11 ~ 100
Refrigerant
Refrigerant Name R407C
Charge kg 29.5
Control Electronic expansion valve
Refrigerator
Oil
Refrigerant Oil DAPHNE FVC68D
Charge Volume L 4.0+4.0+4.0
Standard Accessories
Accessories pipe (Gas, liquid and Discharge pipe),
Connection pipes (Gas pipe), Installation manual,
Operation manual, Jumper wire (Low, High voltage),
Clamps
To Next Page
Loading...
