Cong
10
Identication
Identication shows general information about the player including the Dynamic
Host Conguration Protocol (DHCP) device name, a brief description, the device
identication number, and the chosen startup boot sequence. Refer to Figure 15.
Figure 15: Conguration - Identication
The information in the Device (DHCP) Name, Description, and Device ID elds is set by
Daktronics during system installation.
If the Device ID character string is needed for other operations, use the Copy to
Clipboard function to easily copy this information to the computer’s temporary
clipboard.
Click the red Change button to change the player ID number; however, changing the ID
will result in a loss of communication with any registered services.
Note: Use this feature only as instructed by Daktronics technicians.
The Boot Sequence drop-down list enables the user to select what is shown during the
primary display’s startup procedure. Refer to Figure 15.
• None shows no information and playback starts immediately following start-up.
• Compact shows only product and version information. Playback begins after this is
shown.
• Full shows the description, display dimensions, color depth, time zone, list of
communication services, rmware version, and the IP address. Playback begins after
this is shown. Full is the default mode.
After making a change to any Identication setting, click Save in the upper-left corner.
To Next Page
Loading...
Need help?
General
