Daktronics DMP-8000 Series User Manual

Cong
26
To add default content to a playlist, follow these steps:
1. Click Add to add a new le to the playlist. Item 1 settings appear.
2. Enter the le name or click Browse to locate the desired default content le.
3. Choose the desired Mode from the drop-down list.
• Continuous: The le plays continuously until it is manually stopped or until another
command is issued.
• OneTime: The le remains in the playlist for the number of times specied in the
Runtime Count eld before being removed from the playlist. This le plays once
only before moving to the next le in the playlist. The le can remain in the playlist
indenitely by checking the Innite checkbox.
• Repeat: The le remains in the playlist for the number of times specied in the
Runtime Count eld before being removed from the playlist. The le plays
back-to-back for the number of times specied in the Repeat Count eld. The le
can remain in the playlist indenitely by checking the Innite checkbox.
4. Enter the length of time for the le to play (in seconds) in the Duration eld if desired.
Use this to show only the rst part of a clip before moving to the next item.
5. Repeat Steps 1-4 to add another content le to the playlist if desired.
To remove a playlist item, click the button to the right of the item name, and then
click Save in the upper-left corner.
Default Image Duration
Use this eld to provide a default duration to any image le(s) without a specied image
duration.

Daktronics DMP-8000 Series Specifications

General

Brand	Daktronics
Model	DMP-8000 Series
Category	Media Player
Language	English