dallmeier DF4510H - Page 43

DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com 43
On the LDAP server, the LDAP group names with the group prex myhostname would in
this case be as follows:
Group 1 (Administrator): myhostname_G4
Group 2 (User): myhostname_G2
Group 3 (Guest): myhostname_G1
However, it is absolutely necessary to also enter the used group prex on the LDAP client
(this device). For further information regarding this requirement, see below.
Note that for the following settings at least one LDAP user must be a member of group 1
(administrator).
After the LDAP settings have been made on the LDAP server, the LDAP client (this de-
vice) must be congured accordingly.
In this respect, note the following steps and descriptions:
 Ensure that the Login mode is set to LDAP login.
 Select the LDAP options tab.
Fig. 8-10
For the correct access to the directory entries on the LDAP server, the following informa-
tion must be entered:
LDAP server: Name or IP address of the LDAP server
to which the connection is to be established
Example: ldap://servername
ldap://192.168.57.3
LDAP host: Group prex of LDAP group name
Example: myhostname
LDAP base: Base DN (Distinguished Name, search base on the LDAP server);
Object location in the LDAP directory hierarchy
Example: ou=department,dc=example,dc=com
LDAP lter: Default entry: (sAMAccountName=%UNam%)
LDAP attributes: Default entry: memberOf
 Enter the relevant data to access the LDAP server.