dallmeier DF4510H - LDAP Login

DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com 42
Edit/Delete User
 Ensure that the Login mode is set to User login.
 Open the User groups dialogue via
Common settings > User management > User groups ....
 Select the tab of the relevant group.
 Select the relevant user from the users list.
 Edit or Delete the user by clicking the related button.
8.4.1.3 LDAP Login
This setting allows for the centralized user management with LDAP (Lightweight
Directory Access Protocol) using an Active Directory (AD) service (such as
Microsoft Windows Server or Linux server with Samba).
The individual user rights/permissions are granted by three different group policies de-
ned on the LDAP client (this device).
NOTICE
In the LDAP login mode, a login as a local user group or a local user is
no longer possible.
The following LDAP settings should only be performed by an administrator
with advanced skills in LDAP technology.
In order to be able to set the respective group policies/rights on the LDAP client (this de-
vice), each LDAP user intended to obtain access to the device must rst be assigned to
a specic LDAP group on the LDAP server. Then, the dened LDAP group (user-group-
relation) can be read out by the LDAP client (this device).
A valid LDAP group name for each directory entry on the LDAP server must be structured
as follows:
[Group prex][Group sufx]
The group prex is a user-denable expression (for example, myhostname), however, it
is required.
This allows administrators to assign different user groups and, thus, variable user rights to
multiple simultaneously installed LDAP clients of the same system design (e.g. Dallmeier
cameras described here).
The available group sufxes are xed expressions:
Group 1 (Administrator): _G4
Group 2 (User): _G2
Group 3 (Guest): _G1