dallmeier DF4510H - 9 Network; Basic Settings

DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com 47
9 Network
9.1 Basic Settings
The network settings of the device can be congured manually or automatically assigned
by a DHCP (Dynamic Host Conguration Protocol) server.
In order to avoid network conicts, you should clarify if intended network settings are
permitted. In particular, the allocation of an already used IP address may result in mal-
functions.
 Open the Network settings dialogue via Network > Basic settings ....
Fig. 9-1 Network settings and MAC address
Default Factory Settings
Connection type: automatic
Bandwidth limit: none
Get IP settings from DHCP: deactivated
IP address: 192.168.2.28
Netmask: 255.255.255.0
Gateway: 192.168.2.1
Allow IP-Finder network conguration: activated
NOTICE
Incorrect settings may result in the device being no longer available via
the network.
 Contact your network administrator for more information and assis-
tance.
 For troubleshooting purposes, write down the MAC address and all
new settings before changing the conguration.