dallmeier DF4510H - 10 Video; Video Standard; Sensor

DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com 56
10 Video
10.1 Video Standard
Countries and territories use different broadcasting television systems.
To ensure a correct video signal transmission, the device must be set to the appropriate
video standard for your country:
• HD 25/50 fps for “PAL countries”
• HD 30/60 fps for “NTSC countries”
 Open the Video standard dialogue via Video > Video standard ....
Fig. 10-1
This dialogue may be locked by external devices/applications.
 Select a Standard.
 Conrm with OK.
10.2 Sensor
In the sensor settings, the image sensor can be congured and the image processing
parameters can be adjusted to the local lighting conditions.
 Open the Sensor settings dialogue via Video > Sensor ....
 Note the explanations about the sensor settings below.
 Set the relevant options.
 Finally, conrm with OK.
You can restore the factory sensor settings at any time by clicking “Default”.