dallmeier DF4510H - Page 72

DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com 72
 If necessary, enter the Ringbuffer size.
 Select an encoder from the drop-down list Image source to dene the source of the
JPEG images.
The used encoder must be enabled (“Encoder 2” is disabled by default) and congured
for MJPEG encoding (see section “Encoder Settings” on page 63).
 Click Test to check your conguration.
The test was successful if a new JPEG image is uploaded to the FTP directory you
specied.
 Select the Trigger tab.
Fig. 11-5
 Select all relevant triggers which are supposed to initiate an FTP image upload by
activating the related checkboxes.
 Finally, conrm with OK.
Interval, Duration (sec.)
This trigger option allows you to congure the automatic FTP upload of still images based
on a time interval.
The minimum time interval for FTP image uploads is 1 second.
The less the duration between two FTP image uploads is set, the more the network utili-
zation rate (trafc level, bandwidth consumption) may increase.