EasyManua.ls Logo

Dalsa Piranha 2 Series - 1.3 Camera Performance Specifications

Dalsa Piranha 2 Series
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 Piranha 2 Users Manual
03-032-00493-14 Teledyne DALSA
Figure 3: IL-P4 Image Sensor (4k (7µm), 6k, and 8k, 2 tap models)
Figure 4. IT-P4 Image Sensor (4k (7µm), 6k, and 8k, 4 tap models)
1.3 Camera Performance Specifications
The follow ing two tables list the cam eras perform ance sp ecifications. The first table lists
the operating ranges of the camera, and the second table lists the performance
specifications at minimum, nominal and maximum gain levels at 1kHz data rate. Note
that as gain levels increase, performance decreases, because your signal to noise
decreases.
Also note that the cameras performance specifications were obtained using a line rate of
only 1kHz. At low line rates, dark current can become a significant source of noise and
appears in specifications such as FPN, PRNU and noise. If you operate the camera at
faster line rates, such as 10kHz or greater, the amount of dark current will be reduced by
10x or greater.
N Pinned Photodiodes (7µm x 7µm)4 I32 S 4 I 32 S
CCD Readout Shift Register
CCD Readout Shift Register
5 I
5 I
4 I
4 I
TCK
PR
VPR
VSTOR
CR1, CR2, CRLAST
CR1, CR2, CRLAST
VSET
VBB
RST
VOD
VSS
VDD
OS1
32 S
4 I
Light-shielded pixels
N = 4096, 6144 or 8192
Isolation pixels
OS2
Storage Well with Exposure Control and Reset Structure
Storage Well with Exposure Control and Reset Structure
Relative position of package Pin 1
1
All manuals and user guides at all-guides.com

Table of Contents

Related product manuals