DANE-ELEC myDitto User Manual

84
Dane-Elec. All rights reserved 2010
my-Ditto User Manual
10.3.1 To disconnect the external hard drive:
1. Go to disks tab under the settings (refer to page 38)
2. Press on the “unplug” button
3. Wait until the USB2 LED will turn off and the following message will appear:
Disconnect the external hard disk drive from myDitto’s USB2 port located on the rear panel.

DANE-ELEC myDitto Specifications

General

Brand	DANE-ELEC
Model	myDitto
Category	Storage
Language	English