DANE-ELEC myDitto - Product View; Front View

9
Dane-Elec. All rights reserved 2010
my-Ditto User Manual
3.2 Product View
3.2.1 Front view
8. Release (button) my-Ditto shut down*
9. Copy (button) (1) Key authentication
(2) Copy content of external USB device
8+9. Release (button) and Copy (button) Deactivate master key**
10. USB1 (port) for my-Ditto key authentication
* Pressing the release button until the first beep shuts down my-Ditto. Then my-Ditto can be safely
switched off.
** Pressing the release and copy buttons until hearing the first beep deactivates the master key without
erasing anything from the hard disk drive (in the event of a lost master key). For more information,
refer to section 7.6, Lost Master Key, on page 65.
LED Indicators
1. Power
2. LAN
3. Status
4. USB1
5. USB2
6. Hard Disk1
7. Hard Disk2