99
Dane-Elec. All rights reserved 2010
13.6 Restore to factory settings
This restores all the settings to their default values and should only be used as a last resort.
It will:
1. Deactivate the Administrator.
2. My-Ditto time zone will be set to GMT.
3. To configure time my-Ditto will use a default time server .
4. Delete all the DNS address settings, if they exist.
5. Obtain an Automatic IP.
6. Disable the peer to peer service.
7. Enable iTunes/Media Server.
8. Return rescan interval to 900 sec.
9. Return my-Ditto name and workgroup to their default names.
10. Set the Advanced Settings password to the default one.
13.6.1 How?
Reset my-Ditto by pressing both the COPY and the RELEASE buttons simultaneously for
approx. 20 seconds. After 2 seconds. A beep sound should be heard; continue pressing until
a second beep sound is heard then release.
To Next Page
Loading...
Need help?
General
