Conguration -> HISTORY
Controllers
If any controllers are congured for history collection, these can
be seen in the ‘Controllers’ tab. The example below shows a
evaporator controller with the various control groups accessible
via a drop down menu. Any auto history settings will be seen in
these controller group lists, manual conguration of any param-
eter can be done in this page.
Navigate and select appropriate points for
history collection, via the drop down menu
selector. Double click a required line, a pop up
selection box allows the choice of sample rates;
1,2,10,30 mins
1 Hr
Relays, Sensors, On/O Inputs, Variable Outputs & Other
Depending on the dened control criteria, other points may be
viewed and modied under the respective tabs.
34 User Guide Lit. no. USCO.PI.R1.E1.02 © Danfoss 07-2013 AK-SM 850