FC 300 Operating Instructions
How to Install
Mains connection for A1, A2 and A3 frame sizes: NB!:
The plug connector for power can
be removed.
Mains connector A5 (IP 55 ) Enclosure
Whe
n disconnector is used (A5 enclosure) the PE
must be mounted on the left side of the drive.
Mains c onne ction B1 and B2 (IP 21/NEMA Typ e1
and IP 55/NEMA Type12) Enclosures
Usually the power cables for mains are unshielded cables.
19
MG.33.A7.02 - VLT is a registered Danfoss trademark
To Next Page
Loading...
