Danfoss FC 300 Operating Instruction

FC 300 Operating Instructions
How to Read these Operating Instructions
" HowtoReadtheseOperatingInstructions
VLT
®
AutomationDrive FC 300 is designed to provide hig h sh
aft performance on electrical motors. Please
read this manual carefully for proper use. Incorrect handling of the frequency converter may cause improper
operation of the frequency converter or related equipment, s horten lifetime or cause other troubles.
These Operating Instructions will help you get started, install, program, and trou-
bleshoot your VLT
®
AutomationDrive FC 300.
The VLT
®
AutomationDrive FC 300 comes in two shaft performance levels. FC 301 ranges from scalar
(U/f) to VVC+, and F C 302 ranges from scalar (U/f) to servo performance.
These Operating Instructions cover both FC 301
and FC 302. Where information covers both series,
we refer to FC 300. Otherwise, we refer sp ecifically to either FC 301 or FC 302.
Chapter 1, How to Read these Operating
Instructions, introduces the manual
and
informs you about the approvals, symbols, and
abbreviations used in this literature.
Page divider for How to Read these Operating Instructions.
Chapter 2, Safety Instructions and General
Warnings, ent ails instructions on how to
handle the FC 300 correctly.
Page divide
r for Safety Instructions and General Warnings.
3
MG.33.A7.02 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English