Danfoss FC 300 Operating Instruction

FC 300 Operating Instructions
How to Programme
Parameters for FC 300 are grouped into various
parameter g roups for easy selection of the
correct parameters for optimized operation
of the freq u ency converter.
1-xx Load and Motor parameters includes all load and motor related parameters
2-xx Brake parameters
3-xx References and ramping parameters includes DigiPot function
4-xx Limits Warnings; setting of limits and warning parameters
5-xx Digital inputs and o utputs includes relay controls
6-xx Analog inputs and outputs
7-xx Controls; Setting parameters for speed and process controls
8-xx Communication and option p arameters for setting of FC RS485 and FC USB port parameters.
9-xx Profibus parameters
10-xx DeviceNet and CA N Fieldbus parameters
13-xx Smart Logic Control parameters
14-xx Special function parameters
15-xx Drive information parameters
16-xx Read out parameters
17-xx Encoder Option parameters
32-xx MCO 305 Basic para m e ters
33-xx M CO 305 Advanced parameters
34-xx M CO Data Readout parameters
*
defa
ult setting
()dis
play text
[]val
ue for use in communication via serial c ommunication port
40
MG.33.A7.02 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Brand	Danfoss
Model	FC 300
Category	DC Drives
Language	English