Danfoss FC 300 Operating Instruction

FC 300 Operating Instructions
Warnings and Alarms
ALARM 250
New Spare Part:
The power or Switch Mode Power Supply has been
exchanged. The frequency converter type code must
be restored in the E^2PROM. Select the correct type
code in Par 14 -23 according to the lab el on unit.
Remember to select ‘Save to EEPROM’ to complete.
80
MG.33.A7.02 - VLT is a registered Danfoss trademark

Danfoss FC 300 Specifications

General

Enclosure	IP20
Approvals	cUL, UL, CE
EMC filter	Built-in
Communication Options	CANopen, PROFIBUS DP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Output Voltage	0-100% of supply voltage