[131] lb/min
[132] lb/h
Velocity:
[140] ft/s
[141] ft/min
Length:
[145] ft
Temperature:
[160] ° F
Pressure:
[170] psi
[171]
lb/in
2
[170] in WG
[173] ft WG
Power:
[180] HP
0-31 Custom Readout Min Value
Range: Function:
0.00 [0 - par. 0 - 32] This parameter sets the min. value of the custom defined read-
out (occurs at zero speed). Only possible to set different from 0
is when selecting a linear unit in
Custom Readout Unit
, par.
0-30. For Quadratic and Cubic units the minimum value will be
0.
0-32 Custom Readout Max Value
Range: Function:
100.00
*
[Par. 0-31 -
999999.99 ]
This parameter sets the max value to be shown when the speed
of the motor has reached the set value for
Motor Speed High
Limit
, (par.4-13/4-14).
2.3.6. LCP Keypad, 0-4*
Enable, disable and password protect individual keys on the LCP keypad.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled No function
[1]
*
Enabled [Hand on] Key enabled
[2] Password Avoid unauthorized start in Hand mode. If par. 0-40 is included
in the Quick Menu, then define the password in par. 0-65
Quick
Menu Password
. Otherwise define the password in par. 0-60
Main Menu Password.
FC 300 Programming Guide 2. How to Programme
MG.33.M2.02 - VLT
®
is a registered Danfoss trademark
39
2
To Next Page
Loading...
