Danfoss FC 301 Operating Guide

Type designation P11K P15K P18K P22K P30K
High/normal load
1)
HO NO HO NO HO NO HO NO HO NO
Typical shaft output [kW/(hp)] 11 (15) 15 (20) 15 (20) 18.5 (25) 18.5 (25) 22 (30) 22 (30) 30 (40) 30 (40) 37 (50)
Enclosure protection rating IP20 B3 B3 B4 B4 B4
Enclosure protection rating IP21,
IP55, IP66
B1 B1 B2 B2 C1
Output current
Continuous (525–550 V) [A] 19 23 23 28 28 36 36 43 43 54
Intermittent (525–550 V) [A] 30 25 37 31 45 40 58 47 65 59
Continuous (551–600 V) [A] 18 22 22 27 27 34 34 41 41 52
Intermittent (551–600 V) [A] 29 24 35 30 43 37 54 45 62 57
Continuous kVA (550 V) [kVA] 18.1 21.9 21.9 26.7 26.7 34.3 34.3 41.0 41.0 51.4
Continuous kVA (575 V) [kVA] 17.9 21.9 21.9 26.9 26.9 33.9 33.9 40.8 40.8 51.8
Maximum input current
Continuous at 550 V [A] 17.2 20.9 20.9 25.4 25.4 32.7 32.7 39 39 49
Intermittent at 550 V [A] 28 23 33 28 41 36 52 43 59 54
Continuous at 575 V [A] 16 20 20 24 24 31 31 37 37 47
Intermittent at 575 V [A] 26 22 32 27 39 34 50 41 56 52
Additional specications
IP20 maximum cable cross-section
2),5)
for mains, brake, motor, and load
sharing [mm
2
] ([AWG])
10, 10,- (8, 8,-) 10, 10,- (8, 8,-) 35,-,-(2,-,-) 35,-,-(2,-,-) 35,-,-(2,-,-)
IP21, IP55, IP66 maximum cable
cross-section
2),5)
for mains, brake,
and load sharing [mm
2
] ([AWG])
16, 10, 10 (6, 8, 8) 16, 10, 10 (6, 8, 8) 35,-,-(2,-,-) 35,-,-(2,-,-) 50,-,- (1,-,-)
IP21, IP55, IP66 maximum cable
cross-section
2),5)
for motor [mm
2
]
([AWG])
10, 10,- (8, 8,-) 10, 10,- (8, 8,-) 35, 25, 25 (2, 4, 4) 35, 25, 25 (2, 4, 4) 50,-,- (1,-,-)
Maximum cable cross-section
2),5)
for
disconnect [mm
2
] ([AWG])
16, 10, 10
(6, 8, 8)
50, 35, 35
(1, 2, 2)
Estimated power loss
at rated maximum load [W]
3)
220 300 300 370 370 440 440 600 600 740
Eciency
4)
0.98 0.98 0.98 0.98 0.98
Table 8.8 Mains Supply 525–600 V (FC 302 only), P11K–P30K
Specications
VLT
®
AutomationDrive FC 301/302
38 Danfoss A/S © 05/2018 All rights reserved. MG33AT02
88

Danfoss FC 301 Specifications

General

Type	AC Drive
Output frequency	0-1000 Hz
Enclosure rating	IP20, IP21, IP55
Control method	Sensorless vector control
Communication options	RS-485, CANopen, Profibus DP
Ambient temperature	-10°C to +50°C
Supply voltage	200-240 V, 380-500 V, 525-690 V
Protection class	IP20, IP21, IP55
Cooling method	Forced air
Relative humidity	5% to 95% (non-condensing)
Storage temperature range	-25 to 70 °C (-13 to 158 °F)