Danfoss Metasys N2 Programming Guide

15-30 Alarm Log: Error Code
Array [10]
Range: Function:
0* [0 - 255 ] View the error code and look up its meaning in
chapter 4 Troubleshooting.
15-31 Alarm Log: Value
Array [10]
Range: Function:
0* [-32767 - 32767 ] View an extra description of the error.
This parameter is mostly used in
combination with alarm 38 internal fault.
15-32 Alarm Log: Time
Array [10]
Range: Function:
0 s* [0 - 2147483647 s] View the time when the logged event
occurred. Time is measured in seconds
from frequency converter start-up.
15-33 Alarm Log: Date and Time
Array [10]
Range: Function:
Size related* [ 0 - 0 ] Array parameter; Date & Time 0–9: This
parameter shows at which time the
logged event occurred.
3.15.5 15-4* Drive Identication
Parameters containing read-only information about the
hardware and software conguration of the frequency
converter.
15-40 FC Type
Range: Function:
0* [0 - 6 ] View the FC type. The readout is identical to the
frequency converter series power eld of the type
code denition, characters 1–6.
15-41 Power Section
Range: Function:
0* [0 - 20 ] View the FC type. The readout is identical to the
frequency converter series power eld of the type
code denition, characters 7–10.
15-42 Voltage
Range: Function:
0* [0 - 20 ] View the FC type. The readout is identical to the
frequency converter series power eld of the type
code denition, characters 11–12.
15-43 Software Version
Range: Function:
0* [0 - 5 ] View the combined SW version (or package
version) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0* [0 - 40 ] View the type code string used for reordering the
frequency converter in its original conguration.
15-45 Actual Typecode String
Range: Function:
0* [0 - 40 ] View the actual type code string.
15-46 Frequency Converter Ordering No
Range: Function:
0* [0 - 8 ] View the 8-digit ordering number used for re-
ordering the frequency converter in its original
conguration.
15-47 Power Card Ordering No
Range: Function:
0* [0 - 8 ] View the power card ordering number.
15-48 LCP Id No
Range: Function:
0* [0 - 20 ] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0* [0 - 20 ] View the control card software version number.
15-50 SW ID Power Card
Range: Function:
0* [0 - 20 ] View the power card software version number.
15-51 Frequency Converter Serial Number
Range: Function:
0* [0 - 10 ] View the frequency converter serial number.
15-53 Power Card Serial Number
Range: Function:
0* [0 - 19 ] View the power card serial number.
15-59 CSIV Filename
Range: Function:
Size related* [0 - 16 ] CSIV Filename readout.
Parameter Descriptions Programming Guide
MG11CE02 Danfoss A/S © 03/2015 All rights reserved. 127
3 3

Danfoss Metasys N2 Specifications

General

Brand	Danfoss
Model	Metasys N2
Category	DC Drives
Language	English