PVHC Electro-Hydraulic Actuation
The PVHC is an electrical actuator module for main spool control. The PVHC control is done by dual Pulse
Width Modulated, high current supply 100-400 Hz PWM control signals. The spool position will shift
when conditions are changed such as temperature change.
Inlet with Hydraulic Pilot Pressure is needed.
PVHC, Electro-Hydraulic Actuator PVHC dimensions
92 [3.62]
39 [1.55]
100.5 [3.96]
Weight: 0,9 kg [1,98 lb]
PVHC schematic
Dither frequency with a certain amplitude is needed for optimal application performance.
Technical Information
PVG 16 Proportional Valve Group
PVG 16 Actuation
©
Danfoss | December 2018 BC00000211en-000901 | 73
To Next Page
Loading...
