Danfoss VACON 100 industrial - Page 62

Procedure for EMC Jumper 1, MR9B
1. Remove the EMC jumper.
e30bh377.10
2. After the change, write "The EMC level was changed" and the date on the "product modified" label. If the label is not yet attached,
attach it on the drive near the nameplate.
e30bg773.10
Product modified
Date:
Date:
Date:
Electrical Installation
Operating Guide | VACON® 100 Wall-mounted Drives
AQ298036140958en-000101 / DPD01711
62 | Danfoss A/S © 2019.05