Danfoss VLT 2800 Design Guide

Illustration 1.7 Connection Example for RFI 1B/LC Filter
Maximum cable length
(screened/armoured) 380-480 V
25 m (At 1A: 50 m)
Enclosure IP20
Maximum rated current 4.0 (Order no.: 195N3100); 9.1
(Order no.: 195N3101)
Maximum voltage 480 V AC
Maximum voltage to ground 300 V AC
Minimum distance between VLT
and RFI 1B/LC filter
Side-by-side
Minimum distance above and
below RFI 1B/LC filter
100 mm
Mounting Vertical mounting only
Dimensions 195N3100 4.0 A
HxWxD (mm)
200x75x168
Dimensions 195N3101 9.1 A
HxWxD (mm)
267.5x90x168
Weight 195N3100 4.0 A 2.4 kg
Weight 195N3101 9.1 A 4.0 kg
Table 1.6 Technical Data for VLT 2803–2875 RFI 1B/LC filter
Introduction to VLT 2800
Design Guide
14 Danfoss A/S © Rev. May/2014 All rights reserved. MG27E402
1
1

Danfoss VLT 2800 Specifications

General

Frequency	50/60 Hz
Enclosure	IP20
Input Voltage	200-240V AC
Output Power Range	0.37-2.2kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-25°C to +65 °C
Relative Humidity	5 - 95% RH, non-condensing
Output Voltage	0 - 100% of supply voltage