Danfoss VLT 2800 Design Guide

Thermal protection................................................................................ 7
Thermistor........................................................................................ 73, 86
Thermistor connection....................................................................... 86
Tightening torque for power terminal......................................... 52
Time-out.................................................................................................. 87
Torque characteristic........................................................................... 68
U
Unintended start................................................................................... 32
V
Variable torque...................................................................................... 68
Vibration and shock.......................................................................... 131
W
Warning and alarm............................................................................ 137
Warning words, extended status words and alarm word... 140
Index Design Guide
158 Danfoss A/S © Rev. May/2014 All rights reserved. MG27E402

Danfoss VLT 2800 Specifications

General

Frequency	50/60 Hz
Enclosure	IP20
Input Voltage	200-240V AC
Output Power Range	0.37-2.2kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interface	RS485
Operating Temperature	-10°C to +40°C
Storage Temperature	-25°C to +65 °C
Relative Humidity	5 - 95% RH, non-condensing
Output Voltage	0 - 100% of supply voltage