Danfoss VLT AQUA FC 202 - 3.6.6 Shielded Cables; 3.6.7 Motor Cable

•
•
•
•
•
7 Options and Accessories Overview
7.1 Introduction
Danfoss oers an extensive range of options and accessories.
This chapter provides an overview of the dierent hardware options and accessories for the VLT
®
FC drive series:
Fieldbus options
Functional extensions
Programmable controllers
Power options
Kits and accessories
7.2 VLT® FC Series Options Concept
Options are used to add extra features to the drive. That allows tailoring the drive to the specic need and application.
The drives have 4 option slots (A, B, C, and D).
4
3
2
1
e30bu325.10
Illustration 41: Option Slots on a VLT
®
FC Series Drive (Example Compact Enclosure)
1
A option
2
B option
3
D option
4
C option
The A-slot options are typically communication options, for example, for adding eldbus functionality.
The B-slot options typically host functional extension options.
The C-slot options host special function options, for example for advanced cascade control.
The D-slot option is used for an external power supply and for the real-time clock.
The options are slot-specic. So an A-option does only t in an A-option slot.
Some options are drive-specic, as they require an application-specic operating system in the drive.
Some additional functionalities are not implemented via hardware options, but via specic software options, for example Digital
Cascade Controller.
For a more detailed overview of available options, download the VLT® Drives FC Series Options Portfolio from www.danfoss.com.
AJ300847815559en-000101 / 130R033756 | Danfoss A/S © 2020.09
Options and Accessories Overview
VLT® AQUA Drive FC 202
Design Guide