Danfoss VLT AutomationDrive FC 301

•
•
3 Mechanical Installation
3.1 Unpacking
3.1.1 Items Supplied
Items supplied vary according to product configuration.
Make sure that the items supplied and the information on the nameplate correspond to the order confirmation.
Check the packaging and the drive visually for damage caused by inappropriate handling during shipment. File any claim for
damage with the carrier. Retain damaged parts for clarification.
e30bd600.13
R
US LISTED
76 X1 E134261 IND. CONT. EQ.
UL Voltage 525-600 V
DANGER
See manual for special condition/mains fuse
voir manual de conditions speclales/fusibles
`
15 min.
VLT
R
Automation Drive
T/C: FC-302P75KT7P21H2XGCXXXSXXXXAXBXCXXXXDX
P/N: 134G6302 S/N: 999999G999
55kW / 75 kW; 75kW / 90 kW (NO)
IN: 3x525-690V 50/60Hz 87/86A; 161/145A (NO)
OUT: 3x0-Vin 0-590Hz 87/83A; 105/100A (NO)
Type 1/ IP21 Tamb. 50 C /122 F
o o
MADE IN DENMARK
Danfoss A/S
6340 NordborgDenmark
www.danfoss.com
1
2
3
4
5
6
7
8
9
10
Illustration 2: Product Nameplate (Example)
1
Type code
2
Code number
3
Serial number
4
Power rating
5
Input voltage, frequency, and current (at low/high
voltages)
6
Output voltage, frequency, and current (at low/high
voltages)
7
Enclosure size and IP rating
8
Maximum ambient temperature
9
Certifications
10
Discharge time (Warning)
N O T I C E
Do not remove the nameplate from the drive (loss of warranty).
3.1.2 Storage
Ensure that the requirements for storage are fulfilled, see 8.4 Ambient Conditions.
AQ267037727118en-000101 / 130R030012 | Danfoss A/S © 2021.01
Mechanical Installation
VLT® AutomationDrive FC 301/FC 302
Operating Guide