Danfoss VLT AutomationDrive FC 301 Operating Guide

•
-
3.2 Installation Environment
N O T I C E
REDUCED LIFETIME
In environments with airborne liquids, particles, or corrosive gases, ensure that the IP/Type rating of the equipment matches the
installation environment. Failure to meet requirements for ambient conditions can reduce lifetime of the drive.
Ensure that requirements for air humidity, temperature, and altitude are met.
Vibration and shock
The drive complies with requirements for units mounted on the walls and floors of production premises, and in panels bolted to
walls or floors. For detailed ambient conditions, refer to 8.4 Ambient Conditions.
3.3 Mounting
3.3.1 Cooling
Ensure that top and bottom clearance for air cooling is provided. See Table 4 for clearance requirements.
a
a
e30bd528.10
Illustration 3: Top and Bottom Cooling Clearance
Table 4: Minimum Airflow Clearance Requirements
Enclosure
A1–A5
B1–B4
C1, C3
C2, C4
a [mm (in)]
100 (3.9)
200 (7.8)
200 (7.8)
225 (8.9)
AQ267037727118en-000101 / 130R0300 | 13Danfoss A/S © 2021.01
Mechanical Installation
VLT® AutomationDrive FC 301/FC 302
Operating Guide

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English