Danfoss VLT Flow Drive FC 111 Design Guide

2.
3.
4.
•
•
•
•
•
•
•
Press [OK] and [Menu].
Power up the drive while still pressing the keys for 10 s.
The drive is now reset, except for the following parameters.
Parameter 1-06 Clockwise Direction
Parameter 15-00 Operating hours
Parameter 15-03 Power Up's
Parameter 15-04 Over Temp's
Parameter 15-05 Over Volt's
Parameter group 15-4* Drive identification
Parameter 18-10 FireMode Log:Event
AJ363928382091en-000101 / 130R0983100 | Danfoss A/S © 2021.04
Programming
VLT® Flow Drive FC 111
Design Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English