Command Sets
C-19
Function Command
Print n
1
+ n
2
X 256 characters from all-character set ESC ( ^ (n
1
)
(n
2
)
(character codes)
(0 ≤ n
1
≤ 255) (0 ≤ n
2
≤ 127)
(0 ≤ n
1
+ n
2
X 256 ≤ 255)
(0 ≤ character codes ≤ 254)
Clear input buffer CAN
Delete a character DEL
Force most significant bit to 1 ESC >
Force most significant bit to 0 ESC =
Cancel control over most significant bit ESC #
Font Selection and Downloading
Select font ESC % (n)
n = 0:Resident character set
1:Downloaded character set
Select letter or draft quality ESC x (n)
n = 0: Draft
1: Letter
Select type style ESC k (n)
• Bitmap font:
n = 0:Roman
1:Sans serif*
2:Courier*
3:Prestige*
4:Script*
5:OCR-B*
6:OCR-A*
7:Orator*
10:Roman T*
11:Sans serif H*
12:Bold*
13:Gothic*
* On some code pages or point sizes, the Roman font or Sans serif font is selected.
Set scalable font mode ESC X m (n
1
)
(n
2
)
• m sets character pitch.
m = 0:Keep previous pitch
1:Set proportional space mode
5:Select character pitch (m/360 inch)
(Reset proportional space mode)
To Next Page
Loading...
