Using Special Mode
4-14
<PRINT DIR>
UNIDIR Unidirectional printing. Unidirectional printing is used for
printing that needs precise vertical alignment. Unidirec-
tional printing is slower than bi-directional printing.
BIDIR Bi-directional printing. The printer prints in either direction
while seeking the next print direction for a shorter print
time. The unidirectional command is ignored.
SOFT CONTROL
(Software Control)
The print direction follows a command from the computer.
If no command is sent, print direction is bi-directional.
=IBM&EPSON========= The following are the Set-Up options for the IBM and
EPSON emulation only.
<CODE PAGE> Selects the character set. Character sets can be used
according to the selected emulation.
Code Page 437, 850, 860, 863, 865, 851, 852, 853, 855, 857, 866,
869, USSR GOST, 864, 437G, 920, 858, 923
=IBM DEFLTS========= The following are the Set-Up options for the IBM Proprinter
2390+ emulation only.
<IBM SET 1/2> Specify a character set of the IBM Proprinter 2390+.
IBM SET 1 IBM character set 1
IBM SET 2 IBM character set 2
<IBM DBL HIGH> Specify whether the character height is doubled. If speci-
fied, change the vertical pitch also.
NO Standard character height
YES Double character height
<IBM AGM> Specify whether the Alternate Graphics Mode (AGM) is
used; in other words, is the printer compatible with the IBM
Graphics printers?
NO The base of line spacing is 1/72 inch or 1/216 inch.
YES The base of line spacing is 1/60 inch or 1/180 inch.
=EPSON DFLTS========= The following are the Set-Up options for the Epson-EP2
emulation only.
<E-CHR SET> Select a national character set.
USA American English
FRANCE French
GERMANY German
UK British English
DENMARK1 Danish 1
SWEDEN Swedish
ITALY Italian
SPAIN1 Spanish 1
JAPAN Japanese
NORWAY Norwegian
MACRO Options Description
To Next Page
Loading...
