CR500 Instant Issuance System Installation and Administrator’s Guide 35
8. Network displays on line 2. Press E
NTER (e) to enter the Network submenu.
9. DHCP/Static IP displays on line 2. Press ENTER (f) to enter the DHCP/Static IP submenu.
10. The current address method (DHCP or Static IP) displays on line 2. Use the up arrow or down
arrow keys, if needed, to display Static IP on line 2. Press E
NTER (g).
11. IP Address displays on line 2. Press the Enter key (h).
To Next Page
Loading...
