36 Install the Printer
12. Enter the assigned IP address obtained in step 1.
The IP address has four bytes, separated by periods. The values shown in the illustration are
an example. Use the address values supplied by your network support personnel.
Begin with the 3-digit byte on the left.
a. Press the up arrow or down arrow keys (i) to enter the first byte.
b. Press ENTER (j) to move to the next byte.
The address byte displays three digits when it can be changed.
c. Repeat step 12a and step 12b for the remaining address bytes.
d. When all four bytes are updated, press E
NTER (k).
To Next Page
Loading...
Need help?
General
