DataCard CR500 Installation And Administrator's Guide

CR500 Instant Issuance System Installation and Administrator’s Guide 55
Pick (A)
1. ExceptionLinearOffset
2. ExceptionRotationOffset
3. Hopper1LinearOffset
4. Hopper1RotationOffset
5. Hopper2LinearOffset
6. Hopper2RotationOffset
7. Hopper3LinearOffset
8. Hopper3RotationOffset
Displays the default, current values,
and allowed ranges for picking cards
from the exception slot and multi-
hopper and the movement of cards
into the printer.
Use the settings to change the current
information or restore the default
values. Refer to “Pick” on page 67 for
more information.
MagStripeGeneral
(A)
1. Coercivity
2. ISOHICOMode
3. Track1Format
4. Track2Format
5. Track3Format
6. RetryCount
Displays the default, current values,
and limits for general magnetic stripe
options. Use to change the current
information or restore the default
values. Refer to “MagStripeGeneral” on
page 68 for more information.
Update Password
(A)
Allows you to set, update, and confirm a new password for the Printer Manager
access usernames.
Set Job Queue State CurrentPassword
NextPassword
ConfirmNextPassword
State:
 Online
 Suspended
 Offline
Use to secure the printer when
performing troubleshooting,
maintenance, and other procedures.
Select a state from the following:
 Online: The printer performs
normally.
 Suspended: Deactivates the printer
but allows some exception jobs to
start.
 Offline: Disables the job queue to
secure the printer before
transporting it.
To re-enable an offline printer and set it
back to online, you must enter the
same password that was used to set it
to offline.
Menu Option Description Purpose

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English