DataDirect Networks SFA12KXE - Disk Enclosure Cabling; Disk Enclosure Cabling Configurations

96-30051-001 Rev. D3 DDN SFA12K (SFA OS 2.3.1) Hardware Installation & Configuration Guide | 57
Appendix B Disk Enclosure Cabling
Table 3 below lists the figure to use for each configuration.
NOTE : The current release of SFA12KXi only supports 5 × SS8460 disk
enclosures, see Figure 100.
The cables are labeled by ports to which they will be connected. In the illustrations, the port
numbers are color-coded to aid in locating matching cables.
Zoning configuration setting is also shown for each configuration.
For E-platforms and pre-configured systems, also refer to Section C.2 "Enclosure Labels" for
information on determining enclosure positions in rack.
Table 3. Disk Enclosure Cabling Figures
Configuration Enclosure Model Number of Enclosures Reference
SFA12K-20 SS7000 1
Figure 75
2
Figure 76
3
Figure 77
4
Figure 78
5
Figure 79
10
Figure 80
20
Figure 81
SS8460 1
Figure 82
2
Figure 83
3
Figure 84
4
Figure 85
5
Figure 86
10
Figure 87
20
Figure 88
SFA12KX /
SFA12K-40
SS7000 1
Figure 89
2
Figure 90
3
Figure 91
4
Figure 92
5
Figure 93
10
Figure 94
20
Figure 95