KYMAN™
1
4- Insert the SIM CARD with the
contacts downward and SD
CARD with the contacts
upward.
5- Push the cards into the slot
using Datalogic Stylus until it
clicks into place.
CAUTION
Follow proper ESD precautions to avoid damaging the SIM/SD. Proper
ESD precautions include, but are not limited to, working on an ESD mat
and ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the SIM/SD card slot for any other accessories.
8
To Next Page
Loading...
