Datalogic Kyman User Manual

KYMAN™
3
3.9.2 Bluetooth® Manager Device Setup
Windows CE Bluetooth® Manager Device Setup
In order to enable a Bluetooth
®
device for communication with the Kyman™ you must
perform the discovery procedure and enable the device as follows:
1. Place the Bluetooth
®
device within the range of the Kyman™ (10 meters).
2. From the “Control Panel” main window double
tap on the “Bluetooth” applet to open the
Bluetooth
®
Manager Device window:
3. Tap on the “Me” button to enter the related
window; then, tap on the “ON” button to
activate the Bluetooth
®
module. The module
activation may be also performed by using the
WIRELESS COMMUNICATION applet as
described in par. 3.8.4.
By tapping on the “HW Details” and “SW
Details” buttons, information about the mobile
computer Bluetooth
®
hardware and software
will be displayed, while the “Enable
Encryption” button starts encryption of the
Bluetooth
®
communication data. If tapping on
the “Close” button the Bluetooth
®
Manager
Device window will be closed.
66

Datalogic Kyman Specifications

General

Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Display number of colors	65536 colors
Internal memory	0.128 GB
Internal memory type	RAM
Compatible memory cards	MiniSD
Processor family	PXA 270
Processor frequency	0.52 GHz
Processor manufacturer	Marvell
Product color	Black
Phone function	No
Wireless technology	IEEE 802.11b/g
Battery capacity	2200 mAh
Keyboard type	53 alphanumeric
I/O ports	3-pin RS232, USB 1.1
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating system installed	Windows CE 5.0
Data network	-
Wi-Fi standards	802.11b, 802.11g

Weight and Dimensions

Depth	55 mm
Width	91 mm
Height	238 mm
Weight	550 g