USE AND FUNCTIONING
3
3.9.3 FTP Server Setup
The Kyman™ Operating System includes a sample File Transfer Protocol (FTP)
server. FTP is used for copying files to and from remote computer systems over a
network using TCP/IP. You can establish a connection to your Kyman™ using its
FTP Server through the following interfaces:
WLAN using the WiFi radio
LAN through the Datalogic Kyman™ Ethernet Multi Cradle (see par. 3.8.5)
Proceed as follows:
1. Create a registry file (extension .reg) to setup and enable FTP Server
communication. A simple example file for anonymous logon is given below:
REGEDIT4
[HKEY_LOCAL_MACHINE\Comm\FTPD]
"DefaultDir"="\\"
"AllowAnonymousUpload"=dword:00000001
"UseAuthentication"=dword:00000000
"BaseDir"="\\"
"IsEnabled"=dword:00000001
"LogSize"=dword:00001000
"DebugOutputMask"=dword:00000017
"DebugOutputChannels"=dword:00000002
"IdleTimeout"=dword:0000012c
"AllowAnonymous"=dword:00000001
"AllowAnonymousVroots"=dword:00000001
2. Copy this file to the Kyman™ using ActiveSync
®
.
3. Launch the .reg file from the Kyman™.
4. Perform a warm boot on the Kyman™.
5. From the PC > Explorer address bar (or running an FTP Client from the PC),
enter the Kyman™ IP address.
NOTE
For more information on FTP Client/Server connections refer to the
following web page:
http://msdn2.microsoft.com/en-us/library/ms901310.aspx
73
To Next Page
Loading...
