Name: Datalogic Kyman
Brand: Datalogic
Rating: 5 (1 reviews)

To Next Page

To Previous Page

USE AND FUNCTIONING

3.5.3 Resetting the Kyman™

Windows CE

There are several reset methods for the Kyman™.

A warm boot terminates an unresponsive application and clears the working RAM,

but preserves both the file system and the registry.

A cold boot forces all applications to close and clears working RAM and files not

resident on the persistent flash memory. Registry is restored from persistent memory

if available or returned to factory default.

A Clean Boot restores the Kyman™ to factory configuration: registry and file system

return to factory default.

Warm Boot

A warm boot closes all applications, clears the working RAM, but preserves the file

system and registry. If an application "hangs" initiate a warm boot to terminate the

application.

To perform a warm boot, press these keys simultaneously:

Cold Boot

A cold boot is a complete reset of the Kyman™ in which all applications are forcibly

closed and RAM is completely cleared. Registry is restored from persistent memory if

a saved copy is available (see 3.8.2) and RAM file system completely erased. You

will lose any applications and data (registry too) which are not stored in persistent

flash memory.

A cold boot is necessary when the Windows CE operating system locks up and the

warm boot command does not work.

To perform a cold boot, press these keys simultaneously:

Clean Boot

A clean boot is a cold boot that causes the device to be restored to factory

configuration. The Kyman™ will reset to its factory configuration, clear the working

RAM and initialize the file system. You will lose any applications and data stored in

persistent flash memory. At the next startup the system will ask to recalibrate the

touch screen.

Questions and Answers:

Need help?

Do you have a question about the Datalogic Kyman and is the answer not in the manual?

Datalogic Kyman Specifications

General