Datalogic Kyman User Manual

USE AND FUNCTIONING
3
NotPrintableChar
: if set to “Remove”, all not printable characters included in the
scanned data are deleted and the final barcode will include only printable characters.
ScanButton: enables/disables the scan button. If the scan button is disabled, the
reader can be triggered under software control.
Default Settings
The following tables contain the default values for the major barcode setup
parameters, according to the type of scan engine mounted on the mobile computer.
For a complete list of parameters and of their configuration procedures, please refer
to the SDK Help file on the CD.
SCAN PARAMETERS
Laser Models
(XXX-1XX,
XXX-4XX)
Imager Models
(XXX-7XX)
Laser Extra Long
Range Models
(XXX-6XX)
ScanTimeout 5000 Not available 5000
BeepType Dual tone Dual tone Dual tone
BeepDuration 20 20 20
BeepFrequency 2000 2000 2000
GoodReadSound Beep.wav Beep.wav Beep.wav
LedDuration 200 mS 200 mS 200 mS
LedPulses 1 1 1
GreenSpot Duration 1000 1000 1000
ContinuousMode Disabled Disabled Disabled
KeyboardEmulation Enabled Enabled Enabled
SoftTrigger Enabled Enabled Enabled
ScanAlwaysOn Disabled Disabled Disabled
NotPrintableChar Leave Leave Leave
ScanButton Enabled Enabled Enabled
43

Datalogic Kyman Specifications

General

Display diagonal	3.5 \
Display resolution	320 x 240 pixels
Display number of colors	65536 colors
Internal memory	0.128 GB
Internal memory type	RAM
Compatible memory cards	MiniSD
Processor family	PXA 270
Processor frequency	0.52 GHz
Processor manufacturer	Marvell
Product color	Black
Phone function	No
Wireless technology	IEEE 802.11b/g
Battery capacity	2200 mAh
Keyboard type	53 alphanumeric
I/O ports	3-pin RS232, USB 1.1
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating system installed	Windows CE 5.0
Data network	-
Wi-Fi standards	802.11b, 802.11g

Weight and Dimensions

Depth	55 mm
Width	91 mm
Height	238 mm
Weight	550 g