1 DATALOGIC MEMOR™
Adding a new Hot Key
When you select ‘New’ on the HKeys tab, this opens the Add New Hotkey dialog box.
To define a new Hot Key, complete the following steps:
1. Enter the key combination to define a new Hot Key in the Enter Key textbox.
2. The Note displays important information indicating Hot Keys that should not be
used.
3. Select/tap OK to save the New Hot Key. If you select/tap X, the key will not be
saved.
COMMAND
DESCRIPTION
Enter Key Enter the desired key combination in this text box to define a Hot Key.
OK
Select/tap OK to add the specified Hot Key.
X
Select/tap X to cancel the specified Hot Key.
Make sure you do not attempt to add a Hot Key that is already defined.
NOTE
To Next Page
Loading...
